TapRite III Tapping Fluid | Threading Fluid




Advanced Formulation for Demanding Tapping and Threading

  • Your first choice for the most severe tapping and threading ferrous metal applications
  • Provides increased tap life and excellent lubricity
  • Chlorinated oil/wax gel concentrate
  • Clings to the tool, reducing waste; however, is easier to remove from parts and hands
  • Low odor, ideal for all ferrous metals
  • Use as is or dilute with mineral oils or spirits for less demanding applications
  • Available in 16 oz. bottles and 1 gallon and 5 gallon pails

TapRite III may stain some aluminum alloys. Testing is recommended before use.

"I tap a lot of 4140, 1018 and D2. TapRite™ III clings to the tap much better than Moly-Dee and provides greater lubricity while increasing tap life, especially in deep holes."

— Jim Martin, Martin Machine, Willoughby, Ohio
Replaces Moly-Dee

Whether you are hand tapping a few holes or need that extra lubricity in your CNC threading operation, we have the right tapping fluid for your application.
 

31025 Carter Street, Solon, Ohio 44139
Phone: 800-229-6744 / 440-287-2302       Fax: 440-287-3095

Copyright ©2018 JTM Products, Inc. KOOLRite and SynMAX are trademarks of JTM Products, Inc.    
It's time to re-think synthetics: Introducing SynMAX™ Coolants
It's time to re-think synthetics: Introducing SynMAX™ Coolants

31025 Carter Street, Solon, Ohio 44139
Phone: 800-229-6744 / 440-287-2302
Fax: 440-287-3095

Copyright ©2018 JTM Products, Inc. All Rights Reserved.
KOOLRite and SynMAX are trademarks of JTM Products, Inc.