You are Here: Home > KoolRite 2580


KOOLRite™ 2580 Premium Performance Synthetic Coolant

Premium Synthetic Coolant for Maximum Performance in Heavy Duty/Severe Machining

KOOLRite 2580 is a new generation synthetic, chemical emulsion cutting fluid, employing technology that provides a new level of machining performance. KOOLRite 2580 outperforms heavy duty, chlorinated soluble oils, semi-synthetics and newer polymer-based synthetic coolants with a machining performance not seen in any competitive coolant.

KOOLRite 2580 is designed for heavy duty/severe machining operations with excellent performance on tough aerospace alloys where high finish important. It has proven performance on metals with less than 15% machinability and high nickel alloys.

KOOLRite 2580 is formulated with JTMís unique BioArmor Technology which gives outstanding control of bacteria without the use of bactericides. BioArmor stops sump odors, gives you exceptionally long sump life and a clean, comfortable, safe work environment for machine operators.

KOOLRite 2580 will reject tramp oils, allowing clean coolant to be delivered to the chip/tool interface keeping your machine tool clean with a minimum of residual film while providing excellent

Koolrite 2580 Advantages

Recommended Starting Dilutions:


Iron & Carbon Steel High Alloy &
Stainless Steels
Tool Steels Aluminum Copper Alloys


4% to 5%

4% to 6%

5% to 6%

5% to 7%

4% to 5%

Milling, Drilling,
Turning, Cut-off, Sawing, Screw Machining

5% to 7%

7% to 8%

6% to 8%

5% to 7%

5% to 7%

Tapping, Reaming,
Broaching, and
Form Milling

5% to 7%

8% to 10%

8% to 10%

8% to 10%

5% to 7%

Directions for Use

The sump life of this coolant, as with any other coolant will be greatly enhanced if charged to a clean system. You can utilize JTM’s Sump Cleaner to disinfect your sump. KOOLRite 2580 can be metered through automatic dispensing systems available from JTM. Contact your representative regarding cleaning procedures and dispensers. Always add the KOOLRite 2580 concentrate to the water and not the water to the concentrate. Proper maintenance in removing extraneous oils is beneficial for extended coolant life. The concentration can be monitored by refractive index.

Refractive Index …………2.2
(Refractive reading x 2.2 = % of concentration of dilution)

Product Data

Appearance: Concentrate
Appearance: Dilution
pH (concentrate):
pH (10% dilution):
Density (lbs/gal):

Clear Amber
Translucent Yellow

KOOLRite 2580 Product Data Sheet


Request SDS