KOOLRite™ 2510 Moderate to Heavy Duty Synthetic Cutting Fluid

KOOLRite 2510 is a proven, new generation synthetic cutting fluid that replaces old style synthetics, soluble oils and semi-synthetics with a coolant that does not contain mid- or long-chain chlorinated paraffins or sulfur. Yet, with the use of new technology 2510 will out perform competitive fluids.

KOOLRite 2510 it is designed for moderate to heavy duty machining operations where extreme pressure is required. It is great for all purpose general machining and grinding and excellent for ferrous and non ferrous metals. (Check aluminum for staining). It's also exceptional for non-metallic machining.

KOOLRite 2510 is formulated with JTM's unique BioArmor Technology which gives outstanding control of bacteria without the use of bactericides. BioArmor stops sump odors, gives you exceptionally long sump life and a clean, comfortable, safe work environment for machine operators.

KOOLRite 2510 will reject tramp oils, allowing clean coolant to be delivered to the chip/tool interface to keep your machine tool clean with a minimum of residual film, while providing excellent corrosion control.

Koolrite 2510 Advantages

  • Very low foaming properties
  • Excellent corrosion protection on ferrous metals
  • Unique non-chlorine anti-wear for improved tool life
  • Long sump life with good biological resistance without the use of bactericide
  • Hard water tolerant
  • Does not contain phenols, nitrites, mid- or long-chain chlorinated paraffins or sulfur
  • Keeps machines clean
  • All purpose, all metals coolant can eliminate the need for multiple coolants
  • Low foam and good lubricity makes it a good choice for many grinding operations.
  • Operator friendly formula

Fully-compliant with expected EPA regulations

  • No mid- or long-chain chlorinated paraffins
  • No DCHA
  • No Bactericides
  • Already meets proposed formaldehyde standards

Recommended Starting Dilutions:

Operations Iron & Carbon Steel High Alloy &
Stainless Steels
Tool Steels Copper Alloys
Grinding

4% to 5%

4% to 6%

5% to 6%

4% to 5%

Milling, Drilling,
Turning, Cut-off, Sawing, Screw Machining

5% to 7%

7% to 8%

6% to 8%

5% to 7%

Tapping, Reaming,
Broaching, and
Form Milling

5% to 7%

8% to 12%

8% to 10%

5% to 7%


Directions for Use

Add the KOOLRite 2510 concentrate to water. Proper maintenance by removing tramp oils is beneficial for extended coolant life. Control the concentration using a Refractometer.

Refractive Index …………1.25
(Refractive reading x 1.25 = % of concentration of dilution)

Product Data

Appearance: Concentrate     
Appearance: Dilution     
pH (concentrate):     
pH (10% dilution):     
Density (lbs/gal):     
Clear Blue
Clear Blue
9.86
9.52
8.8

 
 

31025 Carter Street, Solon, Ohio 44139
Phone: 800-229-6744 / 440-287-2302       Fax: 440-287-3095

Copyright ©2016 JTM Products, Inc. KOOLRite is a trademark of JTM Products, Inc.    
Welcome to our newly redesigned website. We would love to hear what you think of it.
Dynamic news words go in here. They could say who knows what, and change regularly.

31025 Carter Street, Solon, Ohio 44139
Phone: 800-229-6744 / 440-287-2302
Fax: 440-287-3095

Copyright ©2016 JTM Products, Inc. All Rights Reserved.
KOOLRite is a trademark of JTM Products, Inc.